Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Double fire door installation in Clacton-on-Sea

Pairs and leaf-and-a-half doorsets with meeting-edge seals, coordinators and flush bolts. Free survey in Clacton-on-Sea and door-by-door pricing.

Quote in Clacton-on-Sea

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Double fire doors for Clacton-on-Sea buildings

Our double fire doors service in Clacton-on-Sea is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Clacton-on-Sea range from industrial estates to family homes after loft conversions and low-rise blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Leaf-and-a-half doors are a practical option for Clacton-on-Sea care homes and schools that need occasional wide access. Double doors on wards, school corridors and lobbies in Clacton-on-Sea take heavy use, so closing sequence and meeting-edge seals get extra attention.

Why pairs need extra care

The meeting stiles are the weak point of a pair. Gaps there must be controlled, both leaves need intumescent and smoke seals as specified, and if the meeting edges are rebated, a door coordinator is usually needed so the leaves close in the right order. If they close out of sequence, the door may not latch and will not perform as tested.

What you get:

  • Meeting-stile intumescent and smoke seals
  • Door coordinators where meeting edges are rebated
  • Equal pair or leaf-and-a-half doorsets
  • Commissioning of closing sequence

The regulations behind fire doors in Clacton-on-Sea

The rules that apply to fire doors in Clacton-on-Sea are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Clacton-on-Sea block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Clacton-on-Sea need double fire doors?

The need for double fire doors usually arises in office cores or communal corridors, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Clacton-on-Sea to keep escape routes protected throughout.

From enquiry to handover in Clacton-on-Sea

  1. Survey opening width, use and traffic
  2. Select pair configuration and hardware set
  3. Order certified doorset with coordinator and bolts if needed
  4. Install frame and hang both leaves
  5. Set closing sequence, seals and latching
  6. Test hold-open release and record evidence

Prices for double fire doors in Clacton-on-Sea

Guide pricing for double fire doors: £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT. Volume work across several doors in one Clacton-on-Sea building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Clacton-on-Sea and nearby

Clacton-on-Sea is about 41.4 km from Southend-on-Sea, and we cover both, along with nearby Harwich and Colchester. Send us your postcode and we'll confirm survey dates.

Questions from Clacton-on-Sea

Do you work in Clacton-on-Sea?

Yes, we take on double fire doors in Clacton-on-Sea and the surrounding area, including Harwich and Colchester. Send your postcode and a few details and we'll come back with survey dates.

Can you work from an existing inspection report for my Clacton-on-Sea building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

What does a door coordinator do?

It holds the leaf that must close second until the first leaf has shut, so rebated meeting edges close in the right order and both leaves latch. Without it, the pair can end up open or misaligned.

Why does the gap between the two leaves matter?

The meeting edges are where flame and smoke can pass most easily. The gap and the seals there must match the certification for the pair to perform as tested.

Talk to us about Clacton-on-Sea

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote