Composite fire doors for Wigan buildings
Our composite fire doors service covers Wigan and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Wigan has a broad mix of buildings, including care homes, purpose-built flats and schools, and the same fire door principles apply to all of them.
For deck-access blocks in and around Wigan, we specify composite doors certified for external use, with the right threshold detail. We only fit composite doors in Wigan in configurations covered by the product's certification.
How we fit composite doorsets
Composite doorsets are installed strictly to the manufacturer's instructions, which typically set out fixing positions, packing, the sealing of the frame-to-wall gap and threshold details. We set the closer so that it closes and latches the door, test the locks and record everything for your files. Where a resident or freeholder chooses colours, we make sure the chosen option is within the certified range.
On a typical job that means:
- Certificate reference and photo record
- Self-closer, smoke and intumescent seals
- Advice on certified composite products and options
- FD30S composite doorset made to measure
Fire door law for Wigan properties
Fire doors in Wigan fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Wigan above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where composite fire doors fit in Wigan
The need for composite fire doors usually arises in converted flats or deck-access blocks, and sometimes purpose-built blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Wigan to keep escape routes protected throughout.
The steps on a Wigan installation
- Survey opening, threshold and exposure
- Agree colour, glazing and hardware within the certified range
- Order doorset to measure
- Remove existing door and frame
- Install, seal and adjust to the manufacturer's instructions
- Test closer and locks and hand over evidence
Budgeting for composite fire doors in Wigan
Guide pricing for composite fire doors: £1,400–£2,600 per composite flat entrance doorset supplied and fitted, ex VAT. Volume work across several doors in one Wigan building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Wigan
Neighbouring towns such as Hindley, Ashton-in-Makerfield, Westhoughton and Golborne are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover WN1 and nearby postcodes?
Yes. We cover Wigan including WN1, and nearby towns such as Hindley and Ashton-in-Makerfield. The survey and written quote are free.
Can you work from an existing inspection report for my Wigan building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do composite fire doors need a closer?
Yes, as flat entrance doors they need a self-closing device that closes and latches them. This can be overhead or concealed, depending on the certified options.
Can I add a letterbox to a composite fire door?
Only if the letterplate is part of the certified doorset. Cutting one in afterwards would compromise the door's fire performance.