Certified fire doorsets in Wigan

Certified fire doorsets in Wigan, done to the evidence

Our certified fire doorsets service covers Wigan and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

In and around Wigan, fire door work covers everything from offices to GP surgeries. We plan each job around the people who use the building.

Doorsets suit refurbishment programmes in Wigan, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Wigan is handed over with its certificate reference and photographs of the frame fixing and gap sealing.

How is a doorset installed?

The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.

As standard, the work covers:

• Pre-hung, pre-machined doorsets where available
• Frame fixing and frame-to-wall gap sealing
• Doorset selection to rating, size and use
• Certificate references and photo record per opening

What the rules say for Wigan

Fire doors in Wigan fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Wigan above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where certified fire doorsets fit in Wigan

From new-build and conversion projects to blocks of flats, the requirement for certified fire doorsets in Wigan comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Wigan

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

Guide prices in Wigan

As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Wigan building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Wigan and neighbouring towns

Neighbouring towns such as Hindley, Ashton-in-Makerfield, Westhoughton and Golborne are covered too, so clients with several buildings can use one installer and one evidence format.

Questions