Composite fire doors for Deeside buildings
Our composite fire doors service covers Deeside and the wider Clwyd area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Deeside range from small offices to care homes and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For deck-access blocks in and around Deeside, we specify composite doors certified for external use, with the right threshold detail. We only fit composite doors in Deeside in configurations covered by the product's certification.
What to check before you buy
Composite doors vary widely. The certification must cover the whole doorset as supplied: the core, skin, frame, glazing, letterplate, viewer and every item of hardware. Ask to see the certificate and the installation instructions, and check that the door's configuration, such as a side panel or glazed panel, is actually covered. BS 8214:2026 now includes maintenance guidance for composite and metal doors, reflecting how common they have become.
On a typical job that means:
- FD30S composite doorset made to measure
- Certificate reference and photo record
- Advice on certified composite products and options
- Self-closer, smoke and intumescent seals
Which fire door rules apply in Deeside?
Fire door work in Deeside follows Welsh building regulations and the Welsh Approved Document B. The Fire Safety Order 2005 covers workplaces and the shared parts of residential buildings here too, placing the duty on the responsible person.
The English regulation 10 checking regime does not extend to Deeside, so how often doors are checked comes from the fire risk assessment. We hand over evidence that fits whatever regime your assessor sets.
Who needs composite fire doors in Deeside?
The need for composite fire doors usually arises in housing association estates or purpose-built blocks of flats, and sometimes deck-access blocks. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Deeside to keep escape routes protected throughout.
The steps on a Deeside installation
- Survey opening, threshold and exposure
- Agree colour, glazing and hardware within the certified range
- Order doorset to measure
- Remove existing door and frame
- Install, seal and adjust to the manufacturer's instructions
- Test closer and locks and hand over evidence
Guide prices in Deeside
As a guide, budget £1,400–£2,600 per composite flat entrance doorset supplied and fitted, ex VAT for composite fire doors. The figure for your Deeside building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Deeside
Neighbouring towns such as Hawarden, Buckley, Flint and Chester are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Deeside within your coverage area?
It is. We cover Deeside in Clwyd and neighbouring towns such as Hawarden. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are composite fire doors as good as timber ones?
Both can perform well when they are certified and installed correctly. Composite doors offer low maintenance and colour choice; timber doorsets offer more flexibility on sizes and finishes. The certification and installation matter more than the material.
Can composite fire doors face the weather?
Some are designed for external use on deck-access blocks. The product must be certified for that use and fitted with the right threshold and weather detailing.