Communal fire doors: our service in Deeside
When you book communal fire doors in Deeside, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Deeside, fire door work covers everything from schools to family homes after loft conversions. We plan each job around the people who use the building.
We phase communal door replacements in Deeside so every escape route stays protected throughout the programme. The evidence pack for each communal door in Deeside is set out to support whatever checking regime your fire risk assessment sets.
What makes communal doors different?
Communal doors take far more traffic than flat entrance doors. They are pushed with trolleys, propped open and slammed. Many are pairs, glazed, or fitted with hold-open devices. That combination is why communal doors so often fail inspections for gaps, worn seals, damaged closers and doors that no longer latch.
In England, communal fire doors in residential buildings above 11 metres must be checked at least every three months under regulation 10. A sound installation makes passing those checks routine.
As standard, the work covers:
- Closers, coordinators and hold-opens as required
- Evidence pack suitable for regulation 10 records
- Survey of every communal opening and its use
- Phased programme keeping escape routes protected
Which fire door rules apply in Deeside?
Because Deeside is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.
England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Deeside comes from your fire risk assessment.
Buildings and duty holders in Deeside
Landlords, managing agents, facilities teams and homeowners in Deeside can all commission communal fire doors from us. The usual settings are sheltered and supported housing and hotels, though single doors for blocks of flats are just as welcome.
The steps on a Deeside installation
- Survey communal doors and plan a phased sequence
- Agree working hours and resident notices with the client
- Order doorsets to size with matching hardware
- Replace doors one route section at a time
- Commission closers and hold-opens with the alarm contractor
- Hand over evidence for your fire safety records
Prices for communal fire doors in Deeside
Budget around from around £800 for a single communal doorset to £3,200 for a glazed pair, ex VAT for communal fire doors. Our guide prices are the same in Deeside as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Deeside and nearby
Deeside is about 17.4 km from Wrexham, and we cover both, along with nearby Hawarden and Buckley. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Deeside?
Yes, we take on communal fire doors in Deeside and the surrounding area, including Hawarden and Buckley. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Deeside?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How often should communal fire doors be checked?
In England, every three months for residential buildings above 11 metres under regulation 10. Your fire risk assessment may set other frequencies for other buildings and nations.
Do communal doors need vision panels?
Not always, but they are common on cross-corridor and lobby doors so people can see who is coming the other way. Any glazing has to be fire-rated and fitted in a tested system.