Steel fire doors for Kidderminster buildings
Our steel fire doors service in Kidderminster is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Fire doors in Kidderminster protect escape routes in schools, high-street shops and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Plant rooms, bin stores and warehouses in and around Kidderminster often call for steel doorsets that can take knocks and damp. We anchor and seal steel frames in Kidderminster buildings to the manufacturer's instructions and photograph the work before it is covered.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
Each installation includes:
- Ratings to suit the wall, including 60 minutes
- Factory-prepared hinges and hardware
- Powder-coated finishes
- Single and double steel doorsets
The regulations behind fire doors in Kidderminster
Fire doors in Kidderminster fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Kidderminster above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Kidderminster need steel fire doors?
Typical settings for steel fire doors include plant rooms, warehouses and workshops. In Kidderminster, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Kidderminster
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Prices for steel fire doors in Kidderminster
Guide pricing for steel fire doors: £900–£2,200 per steel doorset supplied and fitted, ex VAT. Volume work across several doors in one Kidderminster building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Kidderminster and neighbouring towns
Neighbouring towns such as Stourport-on-Severn, Stourbridge, Kingswinford and Brierley Hill are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Kidderminster within your coverage area?
It is. We cover Kidderminster in Worcestershire and neighbouring towns such as Stourport-on-Severn. There is no charge for the survey.
Can you work from an existing inspection report for my Kidderminster building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can steel fire doors be painted?
They are usually supplied powder coated. Repainting on site is possible but must avoid covering seals and labels, and should follow the manufacturer's guidance.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.