What steel fire doors in Felling should include
We provide steel fire doors in Felling (NE10 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Felling protect escape routes in schools, houses with integral garages and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Plant rooms, bin stores and warehouses in and around Felling often call for steel doorsets that can take knocks and damp. For steel fire doors in Felling we order factory-prepared doorsets so the hardware matches the test evidence exactly.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
On a typical job that means:
- Frame anchoring and gap sealing to instructions
- Factory-prepared hinges and hardware
- Ratings to suit the wall, including 60 minutes
- Locks, closers and panic hardware as specified
The regulations behind fire doors in Felling
England's framework applies in Felling. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Felling, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Felling need steel fire doors?
Typical settings for steel fire doors include warehouses, car park lobbies and bin stores. In Felling, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Felling
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Guide prices in Felling
Budget around £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. Our guide prices are the same in Felling as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Felling
Nearby towns we cover include Gateshead, Newcastle upon Tyne and Hebburn. Distance from Felling does not change our guide prices, and the survey and quote are free.
Questions from Felling
Do you cover NE10 and nearby postcodes?
Yes. We cover Felling including NE10, and nearby towns such as Gateshead and Newcastle upon Tyne. The survey and written quote are free.
Can you work from an existing inspection report for my Felling building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are steel fire doors better than timber?
Not better, just suited to different places. Steel doors are tougher and resist damp and impact, so they suit plant rooms and industrial areas. Timber doors are more common in residential and office interiors.
How long do steel doorsets take to make?
Steel doorsets are usually made to order with factory-prepared hardware, so allow a few weeks. We confirm the lead time with your quote.