What steel fire doors in Daventry should include
When you book steel fire doors in Daventry, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Daventry protect escape routes in schools, light industrial buildings and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Plant rooms, bin stores and warehouses in and around Daventry often call for steel doorsets that can take knocks and damp. For steel fire doors in Daventry we order factory-prepared doorsets so the hardware matches the test evidence exactly.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
On a typical job that means:
- Single and double steel doorsets
- Ratings to suit the wall, including 60 minutes
- Factory-prepared hinges and hardware
- Locks, closers and panic hardware as specified
The regulations behind fire doors in Daventry
Fire doors in Daventry fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Daventry above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where steel fire doors fit in Daventry
From car park lobbies to workshops, the requirement for steel fire doors in Daventry comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Daventry
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Budgeting for steel fire doors in Daventry
Guide pricing for steel fire doors: £900–£2,200 per steel doorset supplied and fitted, ex VAT. Volume work across several doors in one Daventry building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Daventry and neighbouring towns
Neighbouring towns such as Rugby, Northampton, Royal Leamington Spa and Banbury are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Daventry?
Yes, we take on steel fire doors in Daventry and the surrounding area, including Rugby and Northampton. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Daventry?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.
Can steel fire doors be painted?
They are usually supplied powder coated. Repainting on site is possible but must avoid covering seals and labels, and should follow the manufacturer's guidance.