Steel fire doors in York, done to the evidence
If you need steel fire doors in York, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
York has a broad mix of buildings, including schools, industrial units and GP surgeries, and the same fire door principles apply to all of them.
For steel fire doors in York we order factory-prepared doorsets so the hardware matches the test evidence exactly. We anchor and seal steel frames in York buildings to the manufacturer's instructions and photograph the work before it is covered.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
Each installation includes:
- Single and double steel doorsets
- Locks, closers and panic hardware as specified
- Frame anchoring and gap sealing to instructions
- Powder-coated finishes
The regulations behind fire doors in York
Fire doors in York fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in York above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where steel fire doors fit in York
From workshops to warehouses, the requirement for steel fire doors in York comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Guide prices in York
If you need a budget figure first, the guide for steel fire doors is £900–£2,200 per steel doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
York and neighbouring towns
As well as York, we cover neighbouring towns including Selby, Harrogate and Goole. The survey and quote are free.
Common questions
Is York within your coverage area?
It is. We cover York in North Yorkshire and neighbouring towns such as Selby. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.
How long do steel doorsets take to make?
Steel doorsets are usually made to order with factory-prepared hardware, so allow a few weeks. We confirm the lead time with your quote.