Steel fire doors: our service in Melton Mowbray
Our steel fire doors service in Melton Mowbray is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Melton Mowbray has a broad mix of buildings, including care homes, small blocks of flats and light industrial buildings, and the same fire door principles apply to all of them.
Plant rooms, bin stores and warehouses in and around Melton Mowbray often call for steel doorsets that can take knocks and damp. We anchor and seal steel frames in Melton Mowbray buildings to the manufacturer's instructions and photograph the work before it is covered.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
On a typical job that means:
- Factory-prepared hinges and hardware
- Powder-coated finishes
- Single and double steel doorsets
- Frame anchoring and gap sealing to instructions
Fire door law for Melton Mowbray properties
The rules that apply to fire doors in Melton Mowbray are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Melton Mowbray block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Melton Mowbray
From plant rooms to car park lobbies, the requirement for steel fire doors in Melton Mowbray comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Budgeting for steel fire doors in Melton Mowbray
Budget around £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. Our guide prices are the same in Melton Mowbray as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Melton Mowbray
Melton Mowbray is about 21.7 km from Leicester, and we cover both, along with nearby Loughborough and Oadby. Send us your postcode and we'll confirm survey dates.
Common questions
Is Melton Mowbray within your coverage area?
It is. We cover Melton Mowbray in Leicestershire and neighbouring towns such as Loughborough. There is no charge for the survey.
Can you work from an existing inspection report for my Melton Mowbray building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.
How long do steel doorsets take to make?
Steel doorsets are usually made to order with factory-prepared hardware, so allow a few weeks. We confirm the lead time with your quote.