What riser and cupboard fire doors in Clevedon should include
Our riser and cupboard fire doors service covers Clevedon and the wider Somerset area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Clevedon has a broad mix of buildings, including care homes, schools and light industrial buildings, and the same fire door principles apply to all of them.
Riser and meter cupboard doors in Clevedon blocks are easy to overlook until an inspection flags them. While fitting riser doors in Clevedon, we photograph any gaps in fire stopping we can see and pass them on to you.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
Each installation includes:
- Single and double flush configurations
- Signage as required
- Record of any fire stopping concerns found
- Seals and frame gap sealing
Which fire door rules apply in Clevedon?
Fire doors in Clevedon fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Clevedon above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where riser and cupboard fire doors fit in Clevedon
Typical settings for riser and cupboard fire doors include blocks of flats, office buildings and hotels. In Clevedon, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Clevedon
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Clevedon
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one Clevedon building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Clevedon
Clevedon is about 35.2 km from Bath, and we cover both, along with nearby Nailsea and Portishead. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Clevedon?
Yes, we take on riser and cupboard fire doors in Clevedon and the surrounding area, including Nailsea and Portishead. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.