Riser and cupboard fire doors for Maldon buildings
When you book riser and cupboard fire doors in Maldon, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Maldon range from schools to houses with integral garages and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Riser and meter cupboard doors in Maldon blocks are easy to overlook until an inspection flags them. While fitting riser doors in Maldon, we photograph any gaps in fire stopping we can see and pass them on to you.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
On a typical job that means:
- Fire-rated riser and cupboard doorsets
- Locks and keep-locked arrangements as specified
- Seals and frame gap sealing
- Single and double flush configurations
Which fire door rules apply in Maldon?
England's framework applies in Maldon. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Maldon, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Maldon
Landlords, managing agents, facilities teams and homeowners in Maldon can all commission riser and cupboard fire doors from us. The usual settings are office buildings and hotels, though single doors for blocks of flats are just as welcome.
From enquiry to handover in Maldon
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in Maldon?
Budget around £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. Our guide prices are the same in Maldon as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Maldon
Nearby towns we cover include Witham, Chelmsford and Rayleigh. Distance from Maldon does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover CM9 and nearby postcodes?
Yes. We cover Maldon including CM9, and nearby towns such as Witham and Chelmsford. The survey and written quote are free.
Can you work from an existing inspection report for my Maldon building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.