Getting riser and cupboard fire doors right in Redruth
From the TR16 postcode district outwards, we take on riser and cupboard fire doors across Redruth for homes, blocks and workplaces.
Buildings in and around Redruth range from small blocks of flats to family homes after loft conversions and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Riser and meter cupboard doors in Redruth blocks are easy to overlook until an inspection flags them. We match riser doors in Redruth to the rating of the riser enclosure, not to whatever was there before.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
Each installation includes:
- Fire-rated riser and cupboard doorsets
- Signage as required
- Seals and frame gap sealing
- Single and double flush configurations
The regulations behind fire doors in Redruth
England's framework applies in Redruth. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Redruth, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where riser and cupboard fire doors fit in Redruth
You are most likely to need riser and cupboard fire doors if you look after blocks of flats, hotels or office buildings. Whatever the building in Redruth, we survey each opening and tell you which doors need work and which do not.
How a Redruth job runs
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Redruth
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Redruth building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Redruth and neighbouring towns
As well as Redruth, we cover neighbouring towns including Camborne, Truro and Falmouth. The survey and quote are free.
Questions
Is Redruth within your coverage area?
It is. We cover Redruth in Cornwall and neighbouring towns such as Camborne. There is no charge for the survey.
How quickly can you survey in Redruth?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.