Riser and cupboard fire doors in Crewe: what's involved
Our riser and cupboard fire doors service covers Crewe and the wider Cheshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Crewe protect escape routes in low-rise blocks of flats, houses with integral garages and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Riser and meter cupboard doors in Crewe blocks are easy to overlook until an inspection flags them. While fitting riser doors in Crewe, we photograph any gaps in fire stopping we can see and pass them on to you.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
What you get:
- Fire-rated riser and cupboard doorsets
- Locks and keep-locked arrangements as specified
- Signage as required
- Single and double flush configurations
The regulations behind fire doors in Crewe
In Crewe, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Crewe building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Crewe need riser and cupboard fire doors?
Landlords, managing agents, facilities teams and homeowners in Crewe can all commission riser and cupboard fire doors from us. The usual settings are blocks of flats and hotels, though single doors for student accommodation are just as welcome.
How a Crewe job runs
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Budgeting for riser and cupboard fire doors in Crewe
If you need a budget figure first, the guide for riser and cupboard fire doors is £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Crewe and neighbouring towns
Nearby towns we cover include Winsford, Kidsgrove and Congleton. Distance from Crewe does not change our guide prices, and the survey and quote are free.
Questions
Is Crewe within your coverage area?
It is. We cover Crewe in Cheshire and neighbouring towns such as Winsford. There is no charge for the survey.
How quickly can you survey in Crewe?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.