Riser and cupboard fire doors in Cambridge: what's involved
From the CB2 postcode district outwards, we take on riser and cupboard fire doors across Cambridge for homes, blocks and workplaces.
Around Cambridge, HMOs, converted period houses and purpose-built flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Riser and meter cupboard doors in Cambridge blocks are easy to overlook until an inspection flags them. We match riser doors in Cambridge to the rating of the riser enclosure, not to whatever was there before.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
As standard, the work covers:
- Signage as required
- Seals and frame gap sealing
- Locks and keep-locked arrangements as specified
- Fire-rated riser and cupboard doorsets
Which fire door rules apply in Cambridge?
Fire doors in Cambridge fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Cambridge above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Cambridge
Typical settings for riser and cupboard fire doors include blocks of flats, hotels and office buildings. In Cambridge, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Cambridge
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in Cambridge?
Budget around £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. Our guide prices are the same in Cambridge as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Cambridge
Cambridge is about 48.4 km from Peterborough, and we cover both, along with nearby Newmarket and Ely. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Cambridge?
Yes, we take on riser and cupboard fire doors in Cambridge and the surrounding area, including Newmarket and Ely. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Cambridge?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.