Intumescent strips and smoke seals in Barry

Intumescent strips and smoke seals: our service in Barry

Our intumescent strips and smoke seals service in Barry is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Barry range from low-rise blocks of flats to high-street shops and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Painted and missing seals are among the most common fire door defects nationally; in Barry we replace them with the type and size the certification specifies. We check that each door in your Barry building closes and latches against its new seals before signing it off.

Getting the specification right

The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.

What you get:

• Intumescent pads to hinges and locks
• Removal of damaged or painted seals
• Intumescent strips in frame or leaf edge
• Check of gaps and closing after fitting

Which fire door rules apply in Barry?

Fire door work in Barry follows Welsh building regulations and the Welsh Approved Document B. The Fire Safety Order 2005 covers workplaces and the shared parts of residential buildings here too, placing the duty on the responsible person.

The English regulation 10 checking regime does not extend to Barry, so how often doors are checked comes from the fire risk assessment. We hand over evidence that fits whatever regime your assessor sets.

Which buildings in Barry need intumescent strips and smoke seals?

Typical settings for intumescent strips and smoke seals include HMOs, care homes and blocks of flats. In Barry, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Prices for intumescent strips and smoke seals in Barry

Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Barry building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Barry

Nearby towns we cover include Penarth, Cardiff and Caerphilly. Distance from Barry does not change our guide prices, and the survey and quote are free.

Questions from Barry