Intumescent strips and smoke seals in Portishead

Intumescent strips and smoke seals: our service in Portishead

Our intumescent strips and smoke seals service covers Portishead and the wider Somerset area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Portishead has a broad mix of buildings, including family homes after loft conversions, care homes and light industrial buildings, and the same fire door principles apply to all of them.

We check that each door in your Portishead building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Portishead we replace them with the type and size the certification specifies.

Getting the specification right

The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.

On a typical job that means:

• Brush or blade smoke seals
• Identification of the specified seals
• Check of gaps and closing after fitting
• Removal of damaged or painted seals

The regulations behind fire doors in Portishead

The rules that apply to fire doors in Portishead are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Portishead block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where intumescent strips and smoke seals fit in Portishead

You are most likely to need intumescent strips and smoke seals if you look after care homes, offices or blocks of flats. Whatever the building in Portishead, we survey each opening and tell you which doors need work and which do not.

From enquiry to handover in Portishead

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Portishead

Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Portishead building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Portishead

Neighbouring towns such as Nailsea, Clevedon, Bristol and Kingswood are covered too, so clients with several buildings can use one installer and one evidence format.

Questions