Getting intumescent strips and smoke seals right in Abingdon
Our intumescent strips and smoke seals service in Abingdon is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Fire doors in Abingdon protect escape routes in light industrial buildings, small blocks of flats and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We check that each door in your Abingdon building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Abingdon we replace them with the type and size the certification specifies.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
As standard, the work covers:
- Identification of the specified seals
- Brush or blade smoke seals
- Intumescent pads to hinges and locks
- Check of gaps and closing after fitting
Rules and responsibilities in Abingdon
England's framework applies in Abingdon. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Abingdon, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Abingdon
You are most likely to need intumescent strips and smoke seals if you look after schools, blocks of flats or care homes. Whatever the building in Abingdon, we survey each opening and tell you which doors need work and which do not.
The steps on a Abingdon installation
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Abingdon
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Abingdon building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Abingdon
Abingdon is about 9.2 km from Oxford, and we cover both, along with nearby Didcot and Witney. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover OX14 and nearby postcodes?
Yes. We cover Abingdon including OX14, and nearby towns such as Didcot and Oxford. The survey and written quote are free.
What happens on a survey in Abingdon?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.