Intumescent strips and smoke seals for Retford buildings
From the DN22 postcode district outwards, we take on intumescent strips and smoke seals across Retford for homes, blocks and workplaces.
In and around Retford, fire door work covers everything from light industrial buildings to small blocks of flats. We plan each job around the people who use the building.
Seal replacement in Retford can be combined with any other remedials on the same inspection report. We check that each door in your Retford building closes and latches against its new seals before signing it off.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
As standard, the work covers:
- Check of gaps and closing after fitting
- Identification of the specified seals
- Intumescent pads to hinges and locks
- Brush or blade smoke seals
Fire door law for Retford properties
In Retford, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Retford building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Retford
From offices to schools, the requirement for intumescent strips and smoke seals in Retford comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Retford
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Retford
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Retford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Retford and neighbouring towns
Neighbouring towns such as Worksop, Gainsborough, Doncaster and Mansfield are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Retford?
Yes, we take on intumescent strips and smoke seals in Retford and the surrounding area, including Worksop and Gainsborough. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Retford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.