Intumescent strips and smoke seals in Tonypandy

Intumescent strips and smoke seals in Tonypandy: what's involved

If you need intumescent strips and smoke seals in Tonypandy, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Tonypandy, fire door work covers everything from low-rise blocks of flats to houses with integral garages. We plan each job around the people who use the building.

Seal replacement in Tonypandy can be combined with any other remedials on the same inspection report. We check that each door in your Tonypandy building closes and latches against its new seals before signing it off.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

What you get:

• Removal of damaged or painted seals
• Intumescent pads to hinges and locks
• Brush or blade smoke seals
• Check of gaps and closing after fitting

What the rules say for Tonypandy

Because Tonypandy is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Tonypandy comes from your fire risk assessment.

Who needs intumescent strips and smoke seals in Tonypandy?

You are most likely to need intumescent strips and smoke seals if you look after HMOs, offices or blocks of flats. Whatever the building in Tonypandy, we survey each opening and tell you which doors need work and which do not.

The steps on a Tonypandy installation

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Tonypandy

Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Tonypandy building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Tonypandy

Neighbouring towns such as Rhondda, Pontypridd, Aberdare and Maesteg are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions