Intumescent strips and smoke seals in Stamford: what's involved
If you need intumescent strips and smoke seals in Stamford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Stamford has a broad mix of buildings, including family homes after loft conversions, houses with integral garages and small offices, and the same fire door principles apply to all of them.
Painted and missing seals are among the most common fire door defects nationally; in Stamford we replace them with the type and size the certification specifies. Seal replacement in Stamford can be combined with any other remedials on the same inspection report.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
Each installation includes:
- Identification of the specified seals
- Intumescent pads to hinges and locks
- Intumescent strips in frame or leaf edge
- Check of gaps and closing after fitting
What the rules say for Stamford
The rules that apply to fire doors in Stamford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Stamford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where intumescent strips and smoke seals fit in Stamford
Landlords, managing agents, facilities teams and homeowners in Stamford can all commission intumescent strips and smoke seals from us. The usual settings are offices and care homes, though single doors for HMOs are just as welcome.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Stamford
Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Stamford as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Stamford
Nearby towns we cover include Peterborough, Corby and Spalding. Distance from Stamford does not change our guide prices, and the survey and quote are free.
Common questions
Is Stamford within your coverage area?
It is. We cover Stamford in Lincolnshire and neighbouring towns such as Peterborough. There is no charge for the survey.
What happens on a survey in Stamford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.