Intumescent strips and smoke seals in Hereford

Intumescent strips and smoke seals in Hereford, done to the evidence

Looking for intumescent strips and smoke seals in Hereford? We supply and fit certified fire doors and components across Hereford and the wider Herefordshire area, working from a free survey and a fixed written quote.

Fire doors in Hereford protect escape routes in low-rise blocks of flats, family homes after loft conversions and HMOs alike. We adapt the programme to the building and its occupants, never the standard of the installation.

We check that each door in your Hereford building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Hereford we replace them with the type and size the certification specifies.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

Each installation includes:

• Check of gaps and closing after fitting
• Identification of the specified seals
• Intumescent strips in frame or leaf edge
• Intumescent pads to hinges and locks

Rules and responsibilities in Hereford

The rules that apply to fire doors in Hereford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Hereford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where intumescent strips and smoke seals fit in Hereford

Typical settings for intumescent strips and smoke seals include HMOs, schools and offices. In Hereford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Hereford

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Prices for intumescent strips and smoke seals in Hereford

Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Hereford as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Hereford and neighbouring towns

As well as Hereford, we cover neighbouring towns including Great Malvern, Worcester and Tewkesbury. The survey and quote are free.

Questions