Intumescent strips and smoke seals in Ebbw Vale, done to the evidence
Our intumescent strips and smoke seals service covers Ebbw Vale and the wider Gwent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Ebbw Vale protect escape routes in light industrial buildings, schools and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Painted and missing seals are among the most common fire door defects nationally; in Ebbw Vale we replace them with the type and size the certification specifies. Seal replacement in Ebbw Vale can be combined with any other remedials on the same inspection report.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
On a typical job that means:
- Intumescent pads to hinges and locks
- Brush or blade smoke seals
- Removal of damaged or painted seals
- Identification of the specified seals
The regulations behind fire doors in Ebbw Vale
Because Ebbw Vale is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.
England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Ebbw Vale comes from your fire risk assessment.
Which buildings in Ebbw Vale need intumescent strips and smoke seals?
You are most likely to need intumescent strips and smoke seals if you look after offices, care homes or HMOs. Whatever the building in Ebbw Vale, we survey each opening and tell you which doors need work and which do not.
Our process in Ebbw Vale
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
What does intumescent strips and smoke seals cost in Ebbw Vale?
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Ebbw Vale building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Ebbw Vale
Ebbw Vale is about 25.5 km from Newport (Gwent), and we cover both, along with nearby Merthyr Tydfil and Pontypool. Send us your postcode and we'll confirm survey dates.
Questions
Is Ebbw Vale within your coverage area?
It is. We cover Ebbw Vale in Gwent and neighbouring towns such as Merthyr Tydfil. There is no charge for the survey.
Can you work from an existing inspection report for my Ebbw Vale building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.