Intumescent strips and smoke seals in Alloa, done to the evidence
Our intumescent strips and smoke seals service in Alloa is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Alloa, family homes after loft conversions, schools and small blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Seal replacement in Alloa can be combined with any other remedials on the same inspection report. We check that each door in your Alloa building closes and latches against its new seals before signing it off.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
As standard, the work covers:
- Intumescent pads to hinges and locks
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
- Removal of damaged or painted seals
Which fire door rules apply in Alloa?
Scottish rules apply to fire doors in Alloa. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Alloa are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Which buildings in Alloa need intumescent strips and smoke seals?
The need for intumescent strips and smoke seals usually arises in HMOs or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Alloa to keep escape routes protected throughout.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Alloa
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Alloa and neighbouring towns
Alloa is about 9.1 km from Stirling, and we cover both, along with nearby Falkirk and Dunfermline. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover FK10 and nearby postcodes?
Yes. We cover Alloa including FK10, and nearby towns such as Stirling and Falkirk. The survey and written quote are free.
What happens on a survey in Alloa?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.

