Fire door hold-open devices: our service in Willenhall
When you book fire door hold-open devices in Willenhall, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Willenhall has a broad mix of buildings, including light industrial buildings, small offices and family homes after loft conversions, and the same fire door principles apply to all of them.
We coordinate with your fire alarm contractor in Willenhall so every hold-open releases when it should. Free-swing closers suit Willenhall settings where residents or pupils find doors hard to open.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
On a typical job that means:
- Record of devices and test results
- Assessment of door use and alarm system
- Hold-open and free-swing closers
- Electromagnetic holders to BS EN 1155
The regulations behind fire doors in Willenhall
The rules that apply to fire doors in Willenhall are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Willenhall block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Willenhall need fire door hold-open devices?
Typical settings for fire door hold-open devices include clinics, communal corridors and schools. In Willenhall, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Prices for fire door hold-open devices in Willenhall
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Willenhall building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Willenhall
Nearby towns we cover include Wednesfield, Wolverhampton and Wednesbury. Distance from Willenhall does not change our guide prices, and the survey and quote are free.
Questions
Is Willenhall within your coverage area?
It is. We cover Willenhall in West Midlands and neighbouring towns such as Wednesfield. There is no charge for the survey.
What happens on a survey in Willenhall?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.