Fire door hold-open devices in Perth, done to the evidence
Looking for fire door hold-open devices in Perth? We supply and fit certified fire doors and components across Perth and the wider Perth & Kinross area, working from a free survey and a fixed written quote.
Buildings in and around Perth range from family homes after loft conversions to light industrial buildings and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers suit Perth settings where residents or pupils find doors hard to open. Where doors in Perth care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
On a typical job that means:
- Record of devices and test results
- Hold-open and free-swing closers
- Coordination of alarm interface
- Assessment of door use and alarm system
The regulations behind fire doors in Perth
In Perth, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Where fire door hold-open devices fit in Perth
Typical settings for fire door hold-open devices include schools, clinics and offices. In Perth, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Perth
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Perth
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Perth as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Perth
Beyond Perth itself we also cover nearby towns such as Glenrothes (27.4 km), Dundee and Kirkcaldy. The service, pricing and evidence are the same wherever you are.
Common questions
Is Perth within your coverage area?
It is. We cover Perth in Perth & Kinross and neighbouring towns such as Glenrothes. There is no charge for the survey.
How quickly can you survey in Perth?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.