Fire door hold-open devices: our service in Selby
We provide fire door hold-open devices in Selby (YO8 and the surrounding postcodes), from the first survey through to a documented handover.
Around Selby, small offices, care homes and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Where doors in Selby care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Selby so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
On a typical job that means:
- Release testing with the alarm
- Assessment of door use and alarm system
- Coordination of alarm interface
- Record of devices and test results
Which fire door rules apply in Selby?
Fire doors in Selby fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Selby above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door hold-open devices fit in Selby
The need for fire door hold-open devices usually arises in offices or care homes, and sometimes clinics. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Selby to keep escape routes protected throughout.
How a Selby job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Selby?
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Selby building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Selby
We also cover towns near Selby, including Goole (15.3 km away), Pontefract and York. If your building is in YO8 or a neighbouring district, the service and pricing are the same.
Questions from Selby
Do you work in Selby?
Yes, we take on fire door hold-open devices in Selby and the surrounding area, including Goole and Pontefract. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Selby building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.