Fire door hold-open devices: our service in Pontypridd
If you need fire door hold-open devices in Pontypridd, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Pontypridd range from schools to small blocks of flats and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We coordinate with your fire alarm contractor in Pontypridd so every hold-open releases when it should. Free-swing closers suit Pontypridd settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
Each installation includes:
- Assessment of door use and alarm system
- Coordination of alarm interface
- Record of devices and test results
- Electromagnetic holders to BS EN 1155
Fire door law for Pontypridd properties
Pontypridd is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.
One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.
Where fire door hold-open devices fit in Pontypridd
Typical settings for fire door hold-open devices include care homes, clinics and communal corridors. In Pontypridd, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Pontypridd
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Prices for fire door hold-open devices in Pontypridd
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Pontypridd building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Pontypridd and nearby
We also cover towns near Pontypridd, including Tonypandy (8.1 km away), Caerphilly and Rhondda. If your building is in CF37 or a neighbouring district, the service and pricing are the same.
Questions from Pontypridd
Do you cover CF37 and nearby postcodes?
Yes. We cover Pontypridd including CF37, and nearby towns such as Tonypandy and Caerphilly. The survey and written quote are free.
What happens on a survey in Pontypridd?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.