Fire door hold-open devices for Wishaw buildings
Our fire door hold-open devices service in Wishaw is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Fire doors in Wishaw protect escape routes in small blocks of flats, schools and light industrial buildings alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Where doors in Wishaw care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Wishaw so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
Each installation includes:
- Coordination of alarm interface
- Assessment of door use and alarm system
- Hold-open and free-swing closers
- Electromagnetic holders to BS EN 1155
Rules and responsibilities in Wishaw
In Wishaw, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Which buildings in Wishaw need fire door hold-open devices?
Typical settings for fire door hold-open devices include clinics, schools and offices. In Wishaw, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Wishaw
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Wishaw
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Wishaw as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Wishaw and neighbouring towns
We also cover towns near Wishaw, including Motherwell (5.3 km away), Hamilton and Airdrie. If your building is in ML2 or a neighbouring district, the service and pricing are the same.
Common questions
Is Wishaw within your coverage area?
It is. We cover Wishaw in Lanarkshire and neighbouring towns such as Motherwell. There is no charge for the survey.
What happens on a survey in Wishaw?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.