Getting fire door hold-open devices right in Stevenage
Looking for fire door hold-open devices in Stevenage? We supply and fit certified fire doors and components across Stevenage and the wider Hertfordshire area, working from a free survey and a fixed written quote.
Buildings in and around Stevenage range from care homes to family homes after loft conversions and industrial estates. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Stevenage care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Stevenage so every hold-open releases when it should.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
On a typical job that means:
- Assessment of door use and alarm system
- Coordination of alarm interface
- Electromagnetic holders to BS EN 1155
- Record of devices and test results
What the rules say for Stevenage
England's framework applies in Stevenage. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Stevenage, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Stevenage
Landlords, managing agents, facilities teams and homeowners in Stevenage can all commission fire door hold-open devices from us. The usual settings are care homes and schools, though single doors for communal corridors are just as welcome.
From enquiry to handover in Stevenage
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Stevenage
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Stevenage building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Stevenage
We also cover towns near Stevenage, including Hitchin (7.7 km away), Letchworth Garden City and Welwyn Garden City. If your building is in SG1 or a neighbouring district, the service and pricing are the same.
Questions
Is Stevenage within your coverage area?
It is. We cover Stevenage in Hertfordshire and neighbouring towns such as Hitchin. There is no charge for the survey.
What happens on a survey in Stevenage?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.