Fire door hold-open devices: our service in Hereford
For property owners, landlords and managing agents in Hereford, we offer fire door hold-open devices with one team for the survey, the product and the installation.
Buildings in and around Hereford range from low-rise blocks of flats to houses with integral garages and high-street shops. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Hereford care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Hereford so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
What you get:
- Release testing with the alarm
- Record of devices and test results
- Assessment of door use and alarm system
- Coordination of alarm interface
Which fire door rules apply in Hereford?
The rules that apply to fire doors in Hereford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Hereford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door hold-open devices in Hereford?
Landlords, managing agents, facilities teams and homeowners in Hereford can all commission fire door hold-open devices from us. The usual settings are communal corridors and schools, though single doors for clinics are just as welcome.
From enquiry to handover in Hereford
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Hereford
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Hereford
As well as Hereford, we cover neighbouring towns including Great Malvern, Worcester and Tewkesbury. The survey and quote are free.
Common questions
Do you work in Hereford?
Yes, we take on fire door hold-open devices in Hereford and the surrounding area, including Great Malvern and Worcester. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.