What fire door hold-open devices in Braintree should include
From the CM7 postcode district outwards, we take on fire door hold-open devices across Braintree for homes, blocks and workplaces.
In and around Braintree, fire door work covers everything from care homes to low-rise blocks of flats. We plan each job around the people who use the building.
Where doors in Braintree care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Braintree so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Coordination of alarm interface
- Electromagnetic holders to BS EN 1155
- Record of devices and test results
- Hold-open and free-swing closers
What the rules say for Braintree
England's framework applies in Braintree. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Braintree, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where fire door hold-open devices fit in Braintree
You are most likely to need fire door hold-open devices if you look after clinics, communal corridors or schools. Whatever the building in Braintree, we survey each opening and tell you which doors need work and which do not.
How a Braintree job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Braintree?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Braintree building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Braintree
Neighbouring towns such as Witham, Chelmsford, Maldon and Sudbury are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover CM7 and nearby postcodes?
Yes. We cover Braintree including CM7, and nearby towns such as Witham and Chelmsford. The survey and written quote are free.
Can you work from an existing inspection report for my Braintree building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.