Fire door hold-open devices in Runcorn, done to the evidence
If you need fire door hold-open devices in Runcorn, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Runcorn has a broad mix of buildings, including high-street shops, schools and low-rise blocks of flats, and the same fire door principles apply to all of them.
Where doors in Runcorn care homes, schools or offices are being wedged open, a hold-open device is the safe fix. Free-swing closers suit Runcorn settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
On a typical job that means:
- Electromagnetic holders to BS EN 1155
- Coordination of alarm interface
- Release testing with the alarm
- Record of devices and test results
The regulations behind fire doors in Runcorn
The rules that apply to fire doors in Runcorn are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Runcorn block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Runcorn
From clinics to care homes, the requirement for fire door hold-open devices in Runcorn comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Runcorn
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Runcorn and nearby
We also cover towns near Runcorn, including Widnes (2.2 km away), Halewood and Speke. If your building is in WA7 or a neighbouring district, the service and pricing are the same.
Questions
Is Runcorn within your coverage area?
It is. We cover Runcorn in Cheshire and neighbouring towns such as Widnes. There is no charge for the survey.
What happens on a survey in Runcorn?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.