What glazed fire doors in London should include
Our glazed fire doors service covers London and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around London, purpose-built blocks of flats, clinics and shared houses all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Schools, offices and care settings in London often need vision panels, and each one has to use fire-rated glass in a tested system. When a vision panel breaks in a London building, we re-glaze it to the door's original glazing system rather than a near match.
New glazed doors or re-glazing?
Where a door already has a certified aperture, it can usually be re-glazed with the specified glass and system after damage. Cutting a new vision panel into an existing fire door is a different matter: it is only acceptable if the door's certification covers that aperture size and position. In most cases a new glazed doorset is the right answer.
On a typical job that means:
- Evidence of the glazing system fitted
- Glazed doorsets with certified apertures
- Fire-rated glass suited to the rating and location
- Re-glazing of damaged vision panels to the original system
Fire door law for London properties
The rules that apply to fire doors in London are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in London sits with the London Fire Brigade.
Where a London block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in London
Typical settings for glazed fire doors include offices, clinics and schools. In London, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in London
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
Guide prices in London
Guide pricing for glazed fire doors: £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT. Volume work across several doors in one London building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
London and neighbouring towns
As well as London, we cover neighbouring towns including City of Westminster, Pimlico and Islington. The survey and quote are free.
Common questions
Is London within your coverage area?
It is. We cover London in Greater London and neighbouring towns such as City of Westminster. There is no charge for the survey.
What happens on a survey in London?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can any toughened glass go in a fire door?
No. Fire doors need fire-rated glass of the type and size covered by the door's test evidence, fitted with the matching beads and seals. Standard toughened glass is not fire resisting.
Are wired glass fire doors still acceptable?
Some older doors use wired glass. Whether it is acceptable depends on its fire rating and whether it meets safety glazing rules for that location. We advise case by case.