Flat entrance fire doors for Felling buildings
Our flat entrance fire doors service covers Felling and the wider Tyne and Wear area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Felling range from care homes to light industrial buildings and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We work with freeholders, managing agents and individual leaseholders in Felling, whoever is responsible for the doors under the lease. In a block of flats in Felling, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door.
What goes into a compliant flat entrance doorset?
We fit certified FD30S doorsets with intumescent and smoke seals, a self-closing device that closes and latches the door from any angle, fire-tested hinges and a lock or latch covered by the certification. Door viewers, spy holes, letterplates, numerals and security hardware can only be fitted if they are part of the doorset's evidence. Where residents want a letterplate, we use one that is covered by the test evidence or recommend a separate post box.
As standard, the work covers:
- Resident liaison, photo record and certificate references
- Self-closer set to close and latch
- Certified FD30S doorset in timber or composite
- Intumescent and smoke seals, threshold set to evidence
What the rules say for Felling
Fire doors in Felling fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Felling above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Felling
You are most likely to need flat entrance fire doors if you look after sheltered housing, flats above shops or purpose-built blocks of flats. Whatever the building in Felling, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Survey each flat door and agree access with residents
- Confirm specification, finish and hardware with the client
- Order certified doorsets made to measure
- Remove the old door and frame with minimal disruption
- Install, seal, adjust and test the new doorset
- Hand over evidence and resident guidance
Budgeting for flat entrance fire doors in Felling
Guide pricing for flat entrance fire doors: £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT. Volume work across several doors in one Felling building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Felling and neighbouring towns
Felling is about 3.5 km from Newcastle upon Tyne, and we cover both, along with nearby Gateshead and Hebburn. Send us your postcode and we'll confirm survey dates.
Questions from Felling
Do you work in Felling?
Yes, we take on flat entrance fire doors in Felling and the surrounding area, including Gateshead and Newcastle upon Tyne. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can residents choose the colour of their front door?
Often, within the range the doorset manufacturer offers and within any rules the freeholder sets for the corridor. Factory finishes are better than site painting, which can clog seals and hide labels.
How long does a flat door replacement take?
Typically half a day per door, with the flat secure at the end of the visit. We agree access times with residents in advance and keep the corridor clear while we work.

