Flat entrance fire doors for Wellingborough buildings
If you need flat entrance fire doors in Wellingborough, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Wellingborough protect escape routes in high-street shops, schools and industrial estates alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In a block of flats in Wellingborough, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door. We work with freeholders, managing agents and individual leaseholders in Wellingborough, whoever is responsible for the doors under the lease.
What goes into a compliant flat entrance doorset?
We fit certified FD30S doorsets with intumescent and smoke seals, a self-closing device that closes and latches the door from any angle, fire-tested hinges and a lock or latch covered by the certification. Door viewers, spy holes, letterplates, numerals and security hardware can only be fitted if they are part of the doorset's evidence. Where residents want a letterplate, we use one that is covered by the test evidence or recommend a separate post box.
Each installation includes:
- Survey of door, frame, threshold and ironmongery
- Intumescent and smoke seals, threshold set to evidence
- Resident liaison, photo record and certificate references
- Certified FD30S doorset in timber or composite
What the rules say for Wellingborough
The rules that apply to fire doors in Wellingborough are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wellingborough block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Wellingborough
You are most likely to need flat entrance fire doors if you look after sheltered housing, purpose-built blocks of flats or converted houses split into flats. Whatever the building in Wellingborough, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Wellingborough
- Survey each flat door and agree access with residents
- Confirm specification, finish and hardware with the client
- Order certified doorsets made to measure
- Remove the old door and frame with minimal disruption
- Install, seal, adjust and test the new doorset
- Hand over evidence and resident guidance
Budgeting for flat entrance fire doors in Wellingborough
Guide pricing for flat entrance fire doors: £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT. Volume work across several doors in one Wellingborough building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Wellingborough and nearby
Neighbouring towns such as Rushden, Kettering, Northampton and Corby are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Wellingborough?
Yes, we take on flat entrance fire doors in Wellingborough and the surrounding area, including Rushden and Kettering. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How long does a flat door replacement take?
Typically half a day per door, with the flat secure at the end of the visit. We agree access times with residents in advance and keep the corridor clear while we work.
Can a flat door have a letterbox?
Only if the letterplate is covered by the doorset's test evidence. A standard letterplate cut into a fire door breaks the rating. Many managing agents choose external post boxes instead.

