What flat entrance fire doors in Gosport should include
If you need flat entrance fire doors in Gosport, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Gosport range from houses with integral garages to schools and high-street shops. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We work with freeholders, managing agents and individual leaseholders in Gosport, whoever is responsible for the doors under the lease. In a block of flats in Gosport, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door.
What goes into a compliant flat entrance doorset?
We fit certified FD30S doorsets with intumescent and smoke seals, a self-closing device that closes and latches the door from any angle, fire-tested hinges and a lock or latch covered by the certification. Door viewers, spy holes, letterplates, numerals and security hardware can only be fitted if they are part of the doorset's evidence. Where residents want a letterplate, we use one that is covered by the test evidence or recommend a separate post box.
As standard, the work covers:
- Intumescent and smoke seals, threshold set to evidence
- Certified FD30S doorset in timber or composite
- Survey of door, frame, threshold and ironmongery
- Self-closer set to close and latch
Rules and responsibilities in Gosport
The rules that apply to fire doors in Gosport are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Gosport block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where flat entrance fire doors fit in Gosport
Typical settings for flat entrance fire doors include purpose-built blocks of flats, converted houses split into flats and sheltered housing. In Gosport, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey each flat door and agree access with residents
- Confirm specification, finish and hardware with the client
- Order certified doorsets made to measure
- Remove the old door and frame with minimal disruption
- Install, seal, adjust and test the new doorset
- Hand over evidence and resident guidance
Prices for flat entrance fire doors in Gosport
As a guide, budget £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT for flat entrance fire doors. The figure for your Gosport building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Gosport and nearby
Neighbouring towns such as Portsmouth, Fareham, Ryde and Waterlooville are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Gosport
Do you work in Gosport?
Yes, we take on flat entrance fire doors in Gosport and the surrounding area, including Portsmouth and Fareham. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Gosport?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long does a flat door replacement take?
Typically half a day per door, with the flat secure at the end of the visit. We agree access times with residents in advance and keep the corridor clear while we work.
Who is responsible for replacing flat front doors?
It depends on the lease. Sometimes the leaseholder owns the door, sometimes the freeholder does. Either way, the replacement has to meet the building's fire strategy, so we can work with whoever commissions it.