Certified fire doorsets in Bromsgrove, B61

Certified fire doorsets for Bromsgrove buildings

For property owners, landlords and managing agents in Bromsgrove, we offer certified fire doorsets with one team for the survey, the product and the installation.

Buildings in and around Bromsgrove range from houses with integral garages to light industrial buildings and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Doorsets suit refurbishment programmes in Bromsgrove, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Bromsgrove is handed over with its certificate reference and photographs of the frame fixing and gap sealing.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

As standard, the work covers:

• Frame fixing and frame-to-wall gap sealing
• Closer set-up and close-and-latch testing
• Certificate references and photo record per opening
• Installation to the manufacturer's instructions

Fire door law for Bromsgrove properties

The rules that apply to fire doors in Bromsgrove are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Bromsgrove block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where certified fire doorsets fit in Bromsgrove

Typical settings for certified fire doorsets include new-build and conversion projects, schools and offices and blocks of flats. In Bromsgrove, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

Prices for certified fire doorsets in Bromsgrove

As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Bromsgrove building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Bromsgrove

We also cover towns near Bromsgrove, including Redditch (8.4 km away), Droitwich and Bartley Green. If your building is in B61 or a neighbouring district, the service and pricing are the same.

Questions