Certified fire doorsets in Poole

Certified fire doorsets for Poole buildings

From the BH15 postcode district outwards, we take on certified fire doorsets across Poole for homes, blocks and workplaces.

In and around Poole, fire door work covers everything from industrial units to purpose-built flats. We plan each job around the people who use the building.

Doorsets suit refurbishment programmes in Poole, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Poole is handed over with its certificate reference and photographs of the frame fixing and gap sealing.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

What you get:

• Frame fixing and frame-to-wall gap sealing
• Certificate references and photo record per opening
• Closer set-up and close-and-latch testing
• Doorset selection to rating, size and use

Rules and responsibilities in Poole

Fire doors in Poole fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Poole above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where certified fire doorsets fit in Poole

Typical settings for certified fire doorsets include refurbishment programmes, new-build and conversion projects and schools and offices. In Poole, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Poole installation

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

What does certified fire doorsets cost in Poole?

Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Poole building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Poole

Nearby towns we cover include Bournemouth, Christchurch and New Milton. Distance from Poole does not change our guide prices, and the survey and quote are free.

Questions