Fire door ironmongery for Yeadon buildings
We provide fire door ironmongery in Yeadon (LS19 and the surrounding postcodes), from the first survey through to a documented handover.
Around Yeadon, schools, small blocks of flats and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Yeadon we replace them with hardware covered by each door's evidence. We supply ironmongery for Yeadon fire doors that matches each door's test evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
As standard, the work covers:
- Bolts and selectors where specified
- Intumescent pads and lock linings
- Locks and latches covered by the evidence
- Fire-rated hinges, commonly grade 13
What the rules say for Yeadon
Fire doors in Yeadon fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Yeadon above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door ironmongery fit in Yeadon
You are most likely to need fire door ironmongery if you look after schools, blocks of flats or offices. Whatever the building in Yeadon, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Yeadon
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Yeadon
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Yeadon building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Yeadon
Yeadon is about 11.9 km from Leeds, and we cover both, along with nearby Guiseley and Shipley. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Yeadon?
Yes, we take on fire door ironmongery in Yeadon and the surrounding area, including Guiseley and Shipley. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Yeadon building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.