Fire door ironmongery in Bedworth

What fire door ironmongery in Bedworth should include

If you need fire door ironmongery in Bedworth, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Bedworth, fire door work covers everything from small blocks of flats to schools. We plan each job around the people who use the building.

Signage for fire doors in Bedworth buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Bedworth we replace them with hardware covered by each door's evidence.

Signage

Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.

On a typical job that means:

• Locks and latches covered by the evidence
• Fire door signage
• Intumescent pads and lock linings
• Fire-rated hinges, commonly grade 13

The regulations behind fire doors in Bedworth

England's framework applies in Bedworth. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Bedworth, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where fire door ironmongery fit in Bedworth

Landlords, managing agents, facilities teams and homeowners in Bedworth can all commission fire door ironmongery from us. The usual settings are offices and hotels, though single doors for blocks of flats are just as welcome.

How a Bedworth job runs

1. Identify the door's certification and hardware schedule
2. List items that need replacing
3. Supply matching hardware
4. Fit with correct pads and linings
5. Check operation, closing and latching
6. Record what was fitted

What does fire door ironmongery cost in Bedworth?

If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Bedworth and neighbouring towns

Bedworth is about 4.9 km from Nuneaton, and we cover both, along with nearby Coventry and Hinckley. Send us your postcode and we'll confirm survey dates.

Common questions