Fire door ironmongery in Cramlington: what's involved
If you need fire door ironmongery in Cramlington, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Cramlington protect escape routes in care homes, small blocks of flats and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Cramlington we replace them with hardware covered by each door's evidence. Signage for fire doors in Cramlington buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
- Lever handles, pull handles and push plates
- Locks and latches covered by the evidence
Fire door law for Cramlington properties
In Cramlington, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Cramlington building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Cramlington
From offices to hotels, the requirement for fire door ironmongery in Cramlington comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Cramlington
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Cramlington
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Cramlington as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Cramlington
Neighbouring towns such as Blyth, Gosforth, Ashington and Whitley Bay are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Cramlington?
Yes, we take on fire door ironmongery in Cramlington and the surrounding area, including Blyth and Gosforth. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.