Fire door ironmongery in Leicester: what's involved
When you book fire door ironmongery in Leicester, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Leicester protect escape routes in mixed-use office buildings, care homes and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Signage for fire doors in Leicester buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Leicester we replace them with hardware covered by each door's evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
What you get:
- Lever handles, pull handles and push plates
- Fire door signage
- Locks and latches covered by the evidence
- Intumescent pads and lock linings
The regulations behind fire doors in Leicester
Fire doors in Leicester fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Leicester above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door ironmongery fit in Leicester
You are most likely to need fire door ironmongery if you look after hotels, offices or schools. Whatever the building in Leicester, we survey each opening and tell you which doors need work and which do not.
The steps on a Leicester installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Leicester?
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Leicester building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Leicester and nearby
As well as Leicester, we cover neighbouring towns including Oadby, Wigston and Loughborough. The survey and quote are free.
Questions from Leicester
Do you work in Leicester?
Yes, we take on fire door ironmongery in Leicester and the surrounding area, including Oadby and Wigston. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Leicester?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.