Getting fire door ironmongery right in Accrington
We provide fire door ironmongery in Accrington (BB5 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Accrington, fire door work covers everything from small offices to small blocks of flats. We plan each job around the people who use the building.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Accrington we replace them with hardware covered by each door's evidence. We supply ironmongery for Accrington fire doors that matches each door's test evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
What you get:
- Lever handles, pull handles and push plates
- Bolts and selectors where specified
- Locks and latches covered by the evidence
- Fire door signage
Which fire door rules apply in Accrington?
Fire doors in Accrington fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Accrington above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Accrington
From HMOs to hotels, the requirement for fire door ironmongery in Accrington comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Accrington
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Accrington
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Accrington as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Accrington
Nearby towns we cover include Rawtenstall, Blackburn and Darwen. Distance from Accrington does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover BB5 and nearby postcodes?
Yes. We cover Accrington including BB5, and nearby towns such as Rawtenstall and Blackburn. The survey and written quote are free.
Can you work from an existing inspection report for my Accrington building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.