Getting fire door ironmongery right in Motherwell
If you need fire door ironmongery in Motherwell, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Motherwell has a broad mix of buildings, including schools, small blocks of flats and small offices, and the same fire door principles apply to all of them.
Signage for fire doors in Motherwell buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Motherwell we replace them with hardware covered by each door's evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
As standard, the work covers:
- Bolts and selectors where specified
- Fire-rated hinges, commonly grade 13
- Fire door signage
- Intumescent pads and lock linings
Which fire door rules apply in Motherwell?
Motherwell is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Motherwell.
Where fire door ironmongery fit in Motherwell
Typical settings for fire door ironmongery include HMOs, schools and hotels. In Motherwell, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Motherwell?
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Motherwell building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Motherwell and neighbouring towns
Nearby towns we cover include Hamilton, Wishaw and Coatbridge. Distance from Motherwell does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Motherwell?
Yes, we take on fire door ironmongery in Motherwell and the surrounding area, including Hamilton and Wishaw. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Motherwell?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.