Fire door ironmongery in Kirkcaldy, done to the evidence
When you book fire door ironmongery in Kirkcaldy, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Kirkcaldy range from low-rise blocks of flats to industrial estates and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Kirkcaldy we replace them with hardware covered by each door's evidence. We supply ironmongery for Kirkcaldy fire doors that matches each door's test evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
Each installation includes:
- Fire door signage
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Lever handles, pull handles and push plates
What the rules say for Kirkcaldy
In Kirkcaldy, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
Which buildings in Kirkcaldy need fire door ironmongery?
The need for fire door ironmongery usually arises in HMOs or blocks of flats, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Kirkcaldy to keep escape routes protected throughout.
From enquiry to handover in Kirkcaldy
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Kirkcaldy?
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Kirkcaldy building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Kirkcaldy and nearby
Neighbouring towns such as Glenrothes, Edinburgh, Dunfermline and Musselburgh are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Kirkcaldy within your coverage area?
It is. We cover Kirkcaldy in Fife and neighbouring towns such as Glenrothes. There is no charge for the survey.
What happens on a survey in Kirkcaldy?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.