Fire door ironmongery in Clydebank: what's involved
For property owners, landlords and managing agents in Clydebank, we offer fire door ironmongery with one team for the survey, the product and the installation.
Clydebank has a broad mix of buildings, including family homes after loft conversions, care homes and houses with integral garages, and the same fire door principles apply to all of them.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Clydebank we replace them with hardware covered by each door's evidence. We supply ironmongery for Clydebank fire doors that matches each door's test evidence.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
What you get:
- Bolts and selectors where specified
- Lever handles, pull handles and push plates
- Fire-rated hinges, commonly grade 13
- Locks and latches covered by the evidence
What the rules say for Clydebank
Clydebank is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Clydebank.
Which buildings in Clydebank need fire door ironmongery?
From schools to blocks of flats, the requirement for fire door ironmongery in Clydebank comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Clydebank installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Clydebank?
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Clydebank and neighbouring towns
Neighbouring towns such as Renfrew, Bearsden, Paisley and Glasgow are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Clydebank within your coverage area?
It is. We cover Clydebank in Dunbartonshire and neighbouring towns such as Renfrew. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.