Getting fire door ironmongery right in Derry
Looking for fire door ironmongery in Derry? We supply and fit certified fire doors and components across Derry and the wider County Londonderry area, working from a free survey and a fixed written quote.
Around Derry, care homes, HMOs and high-street shops all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Derry we replace them with hardware covered by each door's evidence. Signage for fire doors in Derry buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
What you get:
- Lever handles, pull handles and push plates
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Intumescent pads and lock linings
Fire door law for Derry properties
Fire door work in Derry follows Northern Ireland's rules: the Building Regulations (Northern Ireland) 2012, with Technical Booklet E as the fire safety guidance, and the Fire Safety Regulations (Northern Ireland) 2010 for premises covered by the 2006 Order.
Council building control handles building work approvals in Northern Ireland, and your fire risk assessment sets the inspection frequency for doors in Derry.
Buildings and duty holders in Derry
You are most likely to need fire door ironmongery if you look after HMOs, schools or blocks of flats. Whatever the building in Derry, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Derry
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Derry as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Derry and neighbouring towns
As well as Derry, we cover neighbouring towns including Coleraine, Omagh and Ballymena. The survey and quote are free.
Common questions
Is Derry within your coverage area?
It is. We cover Derry in County Londonderry and neighbouring towns such as Coleraine. There is no charge for the survey.
Can you work from an existing inspection report for my Derry building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.