Fire door ironmongery in March

Fire door ironmongery for March buildings

Looking for fire door ironmongery in March? We supply and fit certified fire doors and components across March and the wider Cambridgeshire area, working from a free survey and a fixed written quote.

Around March, small blocks of flats, care homes and small offices all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in March we replace them with hardware covered by each door's evidence. We supply ironmongery for March fire doors that matches each door's test evidence.

Why hardware choice matters

Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.

Each installation includes:

• Locks and latches covered by the evidence
• Fire-rated hinges, commonly grade 13
• Intumescent pads and lock linings
• Bolts and selectors where specified

Rules and responsibilities in March

The rules that apply to fire doors in March are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a March block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in March need fire door ironmongery?

From offices to blocks of flats, the requirement for fire door ironmongery in March comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in March

1. Identify the door's certification and hardware schedule
2. List items that need replacing
3. Supply matching hardware
4. Fit with correct pads and linings
5. Check operation, closing and latching
6. Record what was fitted

Budgeting for fire door ironmongery in March

If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering March and nearby

We also cover towns near March, including Wisbech (13.6 km away), Ely and Peterborough. If your building is in PE15 or a neighbouring district, the service and pricing are the same.

Questions from March