What fire door ironmongery in Bracknell should include
Looking for fire door ironmongery in Bracknell? We supply and fit certified fire doors and components across Bracknell and the wider Berkshire area, working from a free survey and a fixed written quote.
Bracknell has a broad mix of buildings, including family homes after loft conversions, schools and care homes, and the same fire door principles apply to all of them.
Signage for fire doors in Bracknell buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Bracknell we replace them with hardware covered by each door's evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Bolts and selectors where specified
- Locks and latches covered by the evidence
- Fire-rated hinges, commonly grade 13
- Lever handles, pull handles and push plates
What the rules say for Bracknell
Fire doors in Bracknell fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Bracknell above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Bracknell need fire door ironmongery?
The need for fire door ironmongery usually arises in blocks of flats or schools, and sometimes hotels. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Bracknell to keep escape routes protected throughout.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Bracknell
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Bracknell and nearby
Neighbouring towns such as Crowthorne, Wokingham, Sandhurst and Camberley are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Bracknell?
Yes, we take on fire door ironmongery in Bracknell and the surrounding area, including Crowthorne and Wokingham. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.